-->
Rotoxkit F Brachionus calyciflorus acute rotifer toxicity test kit

Rotoxkit F — 24-Hour Acute Rotifer Toxicity Test Kit (Brachionus calyciflorus)

TK21 6 tests per kit 24-hour LC50 No culturing ASTM method

A ready-to-use freshwater rotifer test for screening pure compounds, effluents, sediments and surface, ground and waste waters. Dormant cysts hatch in under 24 hours, so there are no cultures to maintain.

Request a Quote

Rotifer Toxicity Testing Without Culturing

The ROTOXKIT F (TK21) is a 24-hour acute toxicity test using the freshwater rotifer Brachionus calyciflorus. Rotifers are small, fast-responding zooplankton and a useful addition to a test battery alongside crustaceans and algae.

Test animals hatch from dormant cysts in under 24 hours. The acute endpoint is mortality after 24 hours, from which a 24-hour LC50 is calculated. A short-chronic version of the test uses a 48-hour reproduction or growth inhibition endpoint and calculates a 48-hour EC50. NOEC and LOEC can be determined with specific data treatment software. See the short-chronic Rotoxkit F (TK23).

Key Features & Benefits

Reproducible

Quality-controlled cysts, uniform test medium made from concentrated salts and standardized multi-well plates.

Cost-effective

No continuous culturing. Minimal equipment: a light table or dissecting microscope, a small incubator and glassware.

Easy to use

Simple handling and scoring. Hands-on time is about 1 hour for the acute test and about 2 hours for the short-chronic test.

Two endpoints

24-hour acute mortality (36 wells) or 48-hour short-chronic growth inhibition (48 wells).

Sensitive

Sensitivity is comparable to tests with cultured rotifers.

Recognized

The acute B. calyciflorus test has been an ASTM standard since 1991. A 48-hour growth inhibition test is proposed in Standard Methods (20th ed., 1998), and the short-chronic test is under consideration as an AFNOR guideline in France.

How the Rotifer Toxicity Test Works

  1. Prepare the medium. Dilute the concentrated freshwater medium (EPA medium) with deionized water.
  2. Hatch the cysts. Incubate the cysts in the hatching container; rotifers hatch in under 24 hours.
  3. Set up the dilution series. Fill the multi-well plate with sample dilutions and controls, then add the rotifers.
  4. Incubate. Incubate for 24 hours (acute) under the conditions given in the protocol.
  5. Score and calculate. Count dead rotifers and calculate the 24-hour LC50 with the supplied sheets.

Kit Contents & Ordering Codes

Each kit includes cyst tubes, concentrated hatching and dilution media, hatching and test containers, micropipettes, an SOP brochure, an abbreviated bench protocol, data scoring sheets, LC50/EC50 calculation sheets and a specification sheet with batch numbers. The short-chronic test adds algal beads, matrix dissolving medium, pre-feeding powder and Lugol fixative.

Rotoxkit F product and component codes.
CodeItemQuantity
TK21Acute ROTOXKIT F with Brachionus calyciflorus6 tests per kit
TB21Tubes with Brachionus calyciflorus cysts10 tubes
TC21Multi-well plates for acute rotifer tests10
TM11Concentrated media sets for freshwater tests (10 X 1 EPA medium)10 sets
TI11Micropipettes for rotifer tests10
TI21Small petri dishes (55 mm)15
TI27Parafilm sheets for rotifer and crustacean tests (3 x 2 squares)10
Equipment needed (not included): incubator with lateral illumination, light table with transparent stage, luxmeter and a dissecting microscope with transparent stage. See the Toxkit equipment page.

Downloads & Resources

Rotoxkit F — Frequently Asked Questions

What does the Rotoxkit F measure?

It measures acute toxicity to the freshwater rotifer Brachionus calyciflorus. Mortality is scored after 24 hours and a 24-hour LC50 is calculated.

Do I need to culture rotifers?

No. Rotifers are supplied as dormant cysts that hatch in under 24 hours, so no live cultures are needed.

How many tests are in one kit?

Each TK21 kit contains everything for six acute tests. The acute test uses 36 wells, and hands-on time is about 1 hour.

Is there a chronic version of the rotifer test?

Yes. The short-chronic Rotoxkit F measures 48-hour reproduction or growth inhibition and calculates an EC50, with NOEC and LOEC available using specific data treatment. It needs algal beads, pre-feeding powder and Lugol fixative, and about 2 hours of hands-on time.

What equipment do I need?

An incubator with lateral illumination, a light table with a transparent stage, a luxmeter and a dissecting microscope with a transparent stage.

How do I order the Rotoxkit F?

Email sales@biotoxicity.com or use the Request a Quote button on this page. EBPI ships internationally every day from our Canadian location in Burlington, Ontario.

Related Toxicity Tests